Fast, Reliable Spray Foam Insulation Across Burleson
Spray foam insulation in Burleson homes typically costs $2,400 – $7,800 depending on the area being treated, with most attic jobs landing between $3,200 and $5,500 when we handle air-sealing at the same time. That number reflects the specific challenge Burleson homeowners face: houses built in the 1980s through the 2000s with original fiberglass that has settled and slumped in the Texas heat. Our crews coordinate from the Dallas-Fort Worth office and serve Burleson daily, so a technician can usually reach your home within a day or two of your call. If you’re tired of rooms that never cool down in July or a ceiling that keeps shedding fine fiberglass dust, call (817) 730-5474 for a written estimate before any work begins.
What you’ll get from Laurel Attic Insulation Fort Worth is the same thing on every job: a written price before we start, live tracking when your technician is on the way, before-and-after photos, and our 365-Day Done Right Promise in writing. That’s the Relay Standard, and it applies to every Spray Foam Insulation project we take on in Burleson.
Why Laurel Attic Insulation Fort Worth Is Burleson’s Preferred Spray Foam Insulation Company
Burleson homeowners keep calling us back for one reason: we treat a 1998 house off Renfro Street differently from a 2015 build near Hidden Creek, because the insulation problems are different. A home off FM 731 with settled blown-in fiberglass needs air-sealing work before fresh foam goes in. A newer home in the Oak Valley subdivision might only need a garage ceiling or rim joist treatment. We make that call on site, and we show you photo proof of what we find before we spray anything.
Every technician who arrives at your Burleson home is background-checked and uniformed, and you’ll get a live arrival time instead of a four-hour window. Our phone line is answered by a real person 24/7, which matters when you’re calling at 6 p.m. on a Tuesday because your attic access hatch is dripping condensation onto the hallway ceiling. We also stock a full range of open-cell and closed-cell foam products from brands like Icynene, Demilec, and Rockwool, so the material we spray matches your house, not whatever happened to be on the truck.
Chase Whitaker leads our team and insists on one standard across every Burleson job: if it’s not done right within 365 days, we come back and make it right at no charge. That promise is written on every invoice. It’s not a slogan. It’s how we’ve operated since 2003 as part of the Relay Home Co. family.
Crawl Space Spray Foam Insulation in Burleson
Crawl Space Spray Foam Insulation in Burleson is the most effective fix we know for the musty-smelling, humid crawl spaces that plague older homes in neighborhoods like Meadowood and along Alsbury Boulevard. When we spray closed-cell foam directly against the foundation walls and rim joists of a vented crawl space, we stop the warm, humid outside air from entering in the first place. That’s what causes the mildew smell and the soft, sticky feeling in the floors above in July and August. A typical crawl space encapsulation using spray foam in Burleson runs $4,200 – $8,500 depending on square footage and how much old batt insulation has to come out first.
What We Address Under Your Burleson Home
Most Burleson crawl spaces we enter have two problems operating at once. The rim joist, that band of wood where the floor joists meet the foundation, was left uninsulated when the house was built. Warm air pours through gaps around plumbing and electrical penetrations. Spray foam, closed-cell in almost every case, seals those gaps and adds an air barrier that fiberglass batts simply cannot provide. If you’ve ever noticed your floors feel cold in January even with the heat running, your crawl space is usually the reason.
When Homeowners Call Us First
We get the most crawl space calls in Burleson between June and September, when the humidity makes the musty odor strong enough to seep into the living room. Homeowners on Wicker Way, Hidden Meadows, and around Shannon Creek tell us the smell gets worse after rain or when the AC runs constantly. Spray foam is the durable fix because it doesn’t absorb moisture the way fiberglass does. Once closed-cell foam is in place, that damp, earthy smell stops coming up through the floor.
Garage Spray Foam Insulation in Burleson
Garage Spray Foam Insulation in Burleson is a targeted project that pays off fast, especially in homes where the garage shares a wall or ceiling with a bedroom or the living room. When we spray open-cell foam on the garage ceiling and the shared wall cavities, we cut the heat that radiates into those rooms from the uninsulated garage space. A Burleson garage ceiling with shared wall typically costs $1,800 – $3,400, and we can usually finish it in a single day. That number goes up if you want the exterior garage walls done too, which we recommend for anyone who uses the garage as a workshop, gym, or second living area.
Shared Walls and Texas Heat
In Burleson’s summers, an uninsulated garage can hit 110 degrees by midafternoon. That heat doesn’t stay in the garage. It moves through the drywall into whatever room sits above or beside it. We see this constantly in homes along Briaroaks Road and the neighborhoods around Irene Street, where bonus rooms sit directly over garages. Spray foam on the garage ceiling stops that heat transfer at the source. Homeowners often tell us their bonus room finally holds a steady temperature after the foam goes in.
A Quieter Garage, Too
Open-cell foam does something else for Burleson garages: it cuts noise. If your garage sits under a bedroom and you hear the door opener or a car stereo coming through the floor, spray foam dampens that transmission noticeably. It’s not a recording studio, but the difference is real. And when we spray the garage ceiling, we also air-seal the penetrations where electrical wires and ductwork pass through, which stops the fine dust and hot air that had been leaking into the room above.
Trusted Brands We Service in Burleson
We spray products from Icynene, Demilec, and Rockwool because those manufacturers produce open-cell and closed-cell foams that hold their R-value over the long term, and they stand behind their material warranties. When a Burleson homeowner has a specific concern, like a chemically sensitive family member or a roof deck that needs a particular fire rating, we can select the right product for that job instead of forcing whatever is on hand. Because we serve Burleson daily, we keep open-cell and closed-cell products in stock and ready, which means your project doesn’t stall while we wait on a shipment.
Common Spray Foam Insulation Problems We See in Burleson Homes
- Settled blown-in fiberglass from the 1990s and early 2000s. Burleson’s tract homes from that era often have attic insulation that was sprayed in at R-38 but has settled to R-19 or lower. Homeowners notice fine dust around ceiling fans and a steady climb in summer electric bills compared to the neighbors.
- Vented attics with thermal bypasses. Recessed lights, dropped soffits, and plumbing vent stacks in Burleson’s wood-frame homes create channels that let hot attic air pour into living spaces. New spray foam can’t do its job if these bypasses aren’t sealed first, which is why we always start with air-sealing.
- Temperature swings cracking old caulk and frames. Burleson’s frequent freeze-thaw cycles and 100-degree summers cause framing lumber to expand and contract. Over years, that opens hairline gaps around top plates and rim joists that let air slip around insulation that was applied long ago.
- Garage ceilings doing nothing in attached garages. Many Burleson homes have bonus rooms or bedrooms over garages with no insulation at all in the garage ceiling cavity. The result is a room that runs 8 – 10 degrees hotter than the rest of the house from May through October.
Pricing for Spray Foam Insulation in Burleson, TX
Here are the ranges we quote for Burleson homes right now. A full attic spray foam job with air-sealing runs $3,200 – $5,500 for a typical 1,200 – 1,800 square foot ranch. Crawl space spray foam with rim joist treatment runs $4,200 – $8,500 depending on access and how much old material has to be removed. Garage ceiling and shared-wall projects run $1,800 – $3,400. Rim joist work alone runs $900 – $1,800. The variables are square footage, how much settled fiberglass has to come out first, and whether you’re going with open-cell or closed-cell. Get a written price before any work starts. Call (817) 730-5474 and we’ll schedule a visit to your Burleson home within a day or two. The estimate is free and the number we quote is the number you pay.
We Also Serve Cities Near Burleson
Our crews work throughout the area around Burleson, so if you have family or a rental property in Fort Worth, Haltom City, Bedford, or Euless, we can handle that project too. Same written pricing, same 365-day promise, same live tracking. Call (817) 730-5474 and tell us which address needs the work.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Spray Foam Insulation in Burleson
Because the original fiberglass in your attic has settled and the house has gaps around recessed lights, plumbing penetrations, and dropped soffits that let hot attic air bypass the insulation completely. Air-sealing closes those channels before the foam goes in, which is the only way the foam can deliver its full R-value. We seal first, then spray, on every Burleson attic we touch. Call (817) 730-5474 to have us look at what’s actually happening above your ceiling.
Yes. That dust is a telltale sign your 1990s-era blown-in fiberglass has settled and is being pulled through gaps around ceiling fixtures by air movement. We remove the old material, air-seal the penetrations, and spray foam directly against the roofline. The dust stops because the pathway is closed, not just covered. If you’re seeing that dust in a Burleson home off Renfro Street or in the Oak Valley area, that’s a house calling out for a top-off or full spray foam retrofit.
Open-cell is usually the better fit for a vented attic in an older Burleson wood-frame home because it’s more forgiving as the structure expands and contracts with the temperature swings we get here. Closed-cell makes more sense in crawl spaces and rim joists where moisture is a factor. We’ll tell you which product fits your specific house when we inspect it. The estimate is free, and the recommendation is based on what we see, not what we’re trying to sell that week.
It stops the heat from moving into the rooms above or beside the garage. In a Burleson summer, an uninsulated garage ceiling radiates 100-plus degree heat directly into whatever room sits on the other side. The foam cuts that transfer, so the bedroom or bonus room over the garage stops fighting a losing battle every afternoon. You’ll notice the difference within a day of the job being done.
In most cases, spraying closed-cell foam on the foundation walls and rim joists removes the moisture source and the musty smell goes with it. A full encapsulation adds a vapor barrier on the floor, which some Burleson crawl spaces need and some don’t. We’ll tell you which one your house needs after we get under there. Call us at (817) 730-5474 for a free inspection and a written quote either way.
Written by Chase Whitaker, Owner at Laurel Attic Insulation Fort Worth, serving Burleson and the surrounding area.